Sure, you can use a pressure washer to clean or remove oil stains. Find out everything you need to know about pressure washers and how to buy quality pressure washers from GZ Industrial Supplies. Whichever method you use to remove oil stains, you'll need time and human labor. Pressure washing oil stains from the inlet is one of the best methods.
Pressure washers use hot water, which, as you probably know when washing dishes, removes oil and grease much more easily than cold water. To clean oil stains and other general cleanings, you'll need a 1700 to 2800 PSI (per square inch) pressure washer. Basically, most pressure washers produce enough PSI to perform most residential cleaning projects. What you need to make sure you have enough is GPM (gallon per minute), which is the flow of water.
For effective cleaning with a pressure washer, make sure the washer's GPM ratings are between 1.5 GPM and 2.5 GPM. Most affordable pressure washers typically meet these requirements. Another feature you can choose from is cold or hot water pressure. For most residential cleaning projects, including removing oil stains, a cold water pressure washer will work well.
Hot water pressure washers tend to be more expensive. You might be surprised to learn that pressure washers can remove oil from asphalt. But pressure washing alone will not solve the problem. You will need to apply degreaser, scrub with a brush and use soap to completely remove the oil.
If you're not sure how to use a pressure washer, an electric pressure washer might be a better choice. If you're going to use a pressure washer to remove oil stains from asphalt, it's important to choose the right type of pressure washer. On the other hand, a pressure washer can solve this problem by removing dirt from any surface. If you have a power wash business, be sure to tell the customer to move their cars before arriving at work.
Therefore, you should take care of these dirty stains immediately before they penetrate the concrete by pressure washing the oil stains.